Tie rod back stitch Center guide post The manufacturer takes you to understand the processing process of the guide post and guide bush
The manufacturer of the Tie rod back stitch Center guide post tells you about the technical development requirements of the guide post and guide bush to analyze. The following will give you a brief understanding of the processing process of the guide post and guide bush.
The processing process of guide post and guide bush:
1. The manufacturer of the Tie rod back stitch Center guide post tells you that the inner cylindrical surface of the guide bush has a high tolerance level and a small surface roughness Ra value. The measures taken are: Divide the processing stages, use drilling-rough boring (reaming)-semi-finishing (reaming)-rough grinding-finishing-grinding, select a fine grinding machine, control the amount of cutting, and fully cool.
2. The manufacturer of the Tie rod back stitch Center guide post tells you that due to the high tolerance level of the working dimensions of the outer cylindrical surface and the small surface roughness Ra value, the measures taken are: in the processing development stage, students are divided, machine tools can be selected, and cutting The requirements for dosage control are the same as those for inner cylindrical surface processing enterprises. In addition, the technological route is: rough turning - semi-finishing turning - rough grinding - fine grinding. The inner cylindrical surface is limited by a tapered mandrel, and the outer cylindrical surface is ground with the data center holes at both ends of the mandrel. Tie rod back stitch Center guide post The manufacturer tells you that this method has the advantages of easier operation, high production management efficiency, stable quality, safety and reliability, but it requires a special machine tool made in China to design fixtures, so it is suitable for mass production.