News-Self-Lubrication Straight Middle Bush-Precision Mold Parts-Dingxin Metal

Language

Industry News

Company News

Non-Standard Thimble

Double-Section Thimble

Drawbar Water Edge

Stepped Eje Ctor Pins

Home page

Tie rod back stitch Center guide post The manufacturer takes you to understand the processing process of the guide post and guide bush

The manufacturer of the Tie rod back stitch Center guide post tells you about the technical development requirements of the guide post and guide bush to analyze. The following will give you a brief understanding of the processing process of the guide post and guide bush.

2021

Drawbar water edge manufacturers take you to understand the two functions of mold accessories

Drawbar water edge manufacturers tell you that mold accessories, as an indispensable basic product equipment in production and construction, have made indelible and important contributions to the development of many fields and are becoming more and more popular.

2021

Historical sources of Self-lubrication straight bush

Self-lubrication straight bush tells you that bushings are the parts that are commonly used to fill gaps between parts. A bush in a narrow sense refers to a bearing. Bearings are parts that support a rotating shaft. The parts that support the rotating shaft inevitably experience friction.

2021

Tie rod back stitch Center guide post How to maintain it daily

Tie rod back stitch Center guide post is used in the mold, used in conjunction with components, to ensure accurate positioning when the mold moves, to guide the mold travel guide components. They are usually shouldered and cylindrical, often with an oil groove.

2021

Tie rod back stitch Center guide post The manufacturer takes you to understand the role of the guide post in the mold

The manufacturer of the Tie rod back stitch Center guide post tells you that the movable formwork often slides back and forth on the tie rod to open and close the mold during work, so that the movement can run normally, and ensure that the contact position of the movable and fixed formwork is correct when opening and closing.

2021

Introduction to the processing technology of Cylindrical guide bush

The processing method of Guide bush is generally to leave a grinding allowance of 0.3mm after rough turning, and then carry out inner and outer rounds after heat treatment (commonly used 20 steel carburizing, depth 0.8-1.2mm, hardened 58-62HRC) Grinding.

2021

< 1...70 71 72...86 >

language

Shantou Dingxin Metal Products Co., Ltd.

Add：Lai Mei Road Fire Brigade behind Chenghai District Shantou City Guangdong Province China
Tel：+86-0754-85829815 85829816
Fax：+86-0754-85822161
E-mail:Dx-LN@dxjsc.cn

Language

Wechat official account